Ethernet Optional Board (10/100Base-T) - JUMO AQUIS touch P Installation Instructions Manual

18.9.4

Ethernet optional board (10/100Base-T)

Function
Web server
E-mail/SMS text mes-
a
sage
Modbus TCP/IP
Automatic
IP-configuration
Setup via PC
d
Recording function
a
The e-mail function allows the device, when triggered by internal and/or external binary signals, to send
hard-programmed messages. This requires the data of an SMTP server
(E-mail intermediate server) to be known. The e-mail function can be configured exclusively via the PC
setup program.
b
Modbus TCP/IP enables Modbus users to communicate via a LAN, provided this is
connected to the LAN (e.g. via gateways). To configure Modbus communication
you will require the interface description for the JUMO AQUIS touch P.
c
Enlist the help of your network administrator or an IT specialist for the IP-configuration.
d
The recording function stores measurement data in a ring buffer inside the device. Further details appear
on Page 78.
Use
Online visualization via
web browser
E-mail dispatch via
SMTP server
Transmission as SMS
text message
Process data exchange
b
with Modbus users
Network administra-
c
tion
Device settings via PC
setup program
Extract, archive, evalu-
ate measurement data
18 Technical data
Application pro- Special fea-
tocol/ tures
program
HTTP Editable via
HTML Editor
SMTP 5 e-mail tem-
plates
can be stored,
up to 3
recipients for
each e-mail
template
Modbus TCP/IP TCP Port: 502
DHCP -
JUMO PC setup -
program
(HTTP)
JUMO PCC and -
PCA 3000
Connection
RJ 45 socket
73