Table of Contents
Advertisement
Chapter 1 Installing Windows
3.4
Standard Program Package Installation
Standard Program Package (SPP) contains drivers customized for this server.
Make sure to install Standard Program Package before running the server system.
System reboot is required after applying Standard Program Package.
This program can apply using iLO remote console and iLO virtual media.
54
Important
Make sure to update firmware by booting "Starter Pack DVD" before
applying Standard Program Package. If you mistake procedure, the
system may not start.
When you use these options, refer to the following procedure to install
these drivers individually from "Starter Pack DVD" before installing
SPP. SPP may be stopped with error if you do not install the driver
beforehand.
When the R120h-1M / R120h-1M (2nd-Gen) / R120h-2M / R120h-2M
(2nd-Gen) / R110j-1 standard LAN adapter or N8104-171/178/179 is
installed to the server
Run \software\010\drivers\lan1_driver\cp045019.exe on the DVD.
Although the message indicated that the latest version has already been
installed may be displayed, proceed with the installation.
After that, restart the server.
When N8104-213/215 is installed to the server
Run \software\010\drivers\lan2_driver\cp045020.exe on the DVD.
Although the message indicated that the latest version has already been
installed may be displayed, proceed with the installation.
After that, restart the server.
When N8104-173/182/185 is installed to the server
Run \software\010\drivers\lan3_driver\cp047060.exe on the DVD.
Although the message indicated that the latest version has already been
installed may be displayed, proceed with the installation.
After that, restart the server.
When N8104-177/183/187 is installed to the server
Run \software\010\drivers\lan4_driver\cp049989.exe on the DVD.
Although the message indicated that the latest version has already been
installed may be displayed, proceed with the installation.
After that, restart the server.
When N8104-172/180/181 is installed to the server
Run \software\010\drivers\lan5_driver\cp047043.exe on the DVD.
Although the message indicated that the latest version has already been
installed may be displayed, proceed with the installation.
After that, restart the server.
Installation Guide (Windows Server 2016)
3. Installing Windows Server 2016
Advertisement
Table of Contents
