Standard Program Package Installation; Installing Standard Program Package On Desktop Experience - NEC Express5800 Series Installation Manual

Chapter 1 Installing Windows
3.4

Standard Program Package Installation

Standard Program Package (SPP) contains drivers customized for this server.
Make sure to install SPP before running the server system.
3.4.1

Installing Standard Program Package on Desktop Experience

1. Sign-in to the Windows with an Administrators privilege.
2. Set the Starter Pack DVD to the drive.
3. Run the start_up.bat under the root folder on DVD.
4. Click Integrated Installation on the menu.
5. Choose Standard Program Package on the following screen, and then click Install.
Important
After attaching the internal option, application of Standard Program Package
may be required. For details, see Chapter 1 (3.5 Setup of Device Drivers).
Tips
Standard Program Package is already applied in the pre-installed environment. If
you are not changing hardware configuration, reapplication is not necessary.
Express5800/R110j-1 Installation Guide (Windows)
Installing Windows Server 2016
43