Firmware Updates - banks iDash 1.8 DataMonster Owner's Manual

SECTION: 14

FIRMWARE UPDATES

To ensure that your Banks Bus
system is operating as designed,
we recommended checking for
firmware updates for your iDash
1.8 gauges or Banks Modules.
1.
Visit www.bankspower.com/
update
2.
Click on the corresponding product
that you would like to update.
See Figure 14-1.
Figure 14-1
3.
Insert a microSD Card into your
computer using a USB-to-microSD card
reader or similar device. See Figure
14-2.
Figure 14-2
66
97654 v.7
MicroSD card included if data
logging option purchased. You can
use any microSD card up to 32GB for
firmware updates.
4.
Right click on the appropriate
firmware and select "Save Link As..."
See Figure 14-3.
You can save several updates
for multiple products on the same
microSD card.
Figure 14-3
5.
Navigate to the microSD card
drive to save the file. This can be
found under the "Computer" section
on the left section of the window.
The microSD card is typically labeled
"Removable Disk."
The disk letter will be different
from computer to computer. See Figure
14-4.
Figure 14-4