Bar Graph - banks iDash 1.8 DataMonster Owner's Manual

SETTINGS,
12.2.8 Button Color
Only available for "Hardware
Rev: 2" iDash 1.8.
To adjust the button's LED color:
1.
Select "Settings" from the main
"MENU."
2.
Select "Brightness."
See Figure 12-1, A.
3.
Select "Button Color."
See Figure 12-1, B or C.
4.
Scroll UP or DOWN through the
color selection screen and press
"Yes" to select a color. The button
LEDs will display the described color.
See Figure 11-3.
Pressing "No" will take you back to
the "Brightness" menu.
5.
Return to the Gauge Screen when
finished.

12.3 Bar Graph

For layouts "2 Gauge" to "5
Square Light" there is a bar graph
representation of the parameter values
on the Gauge Screen.
In the "Bar Graph" menu, the bar
graphs can be disabled/enabled, have
the color changed, and adjust the min/
max values represented.
56
97654 v.7
CONTINUED
Figure 12-2
A
C
E
G
B
D
F
H