banks iDash 1.8 Quick Start Manual

For banks bus 1

Hide thumbs Also See for iDash 1.8:

Download this manual

Owner' s Manual

iDash

Quick Start Guide

Banks Six-Gun, Economind Tuner

and SpeedBrake vehicles.

THIS MANUAL IS FOR USE WITH SYSTEM 61401, 61402, 61403, & 61404

For more information:

Bankspower.com/iDash

Gale Banks Engineering

546 Duggan Avenue • Azusa, CA 91702

(626) 969-9600 • Fax (626) 334-1743

Product Information & Sales: (888) 635-4565

Customer Support: (888) 839-5600

Installation Support: (888) 839-2700

bankspower.com

1.8 for Banks Bus 1

with Installation Instructions

09/26/18 PN 97674 v.1

Need help?

Do you have a question about the iDash 1.8 and is the answer not in the manual?

Page 1 Owner’ s Manual with Installation Instructions ® iDash 1.8 for Banks Bus 1 Quick Start Guide Banks Six-Gun, Economind Tuner and SpeedBrake vehicles. THIS MANUAL IS FOR USE WITH SYSTEM 61401, 61402, 61403, & 61404 For more information: Bankspower.com/iDash Gale Banks Engineering 546 Duggan Avenue •...
Page 2 • Remove the Panel to reveal the fuse 2. Connect the OBD-II Cable for the panel below the steering wheel and iDash 1.8” (see Figure 2) to your remove Fuse #22. See Figure 4. vehicle’s OBD-II port. • Apply the provided fuse tap before reinstalling.
Page 3 1.8”. See Figure 5, Step 6B. A. Remove any extra terminators. Refer to the iDash 1.8” Installation Only one is needed for all iDash 1.8” connected. See Figure 5, Step 6A. manual for more detailed instructions on iDash 1.8” install.
Page 4 "SpeedBrake" layout HOLD to change SpeedBrake Mode switch automatically while driving. PRESS to change SpeedBrake Strength % Braking See section 12 of iDash 1.8 Owner’s Strength Manual 97654 for more details. Trouble Shooting Note: • If you do not have any communication with the Tuner or SpeedBrake (RPM is always “--”...