Shift Light - banks iDash 1.8 DataMonster Owner's Manual

SECTION: 10

SHIFT LIGHT

The iDash features a user configurable
shift light for you to set to any desired
RPM and change to any of the 23
colors available.
When enabled, the shift light will take
priority over all other alerts
(see Figure 10-2) and will remain on
the display as long as RPM is over the
defined trigger RPM. The shift light will
disappear from the display after engine
RPM drops 300 RPM below the set
trigger point.
To enable/disable the shift light
and set the trigger rpm:
1.
Select "Shift Light" from the main
"MENU."
2.
Select the first item in the "Shift
Light" menu to turn it "On" or "Off".
See Figure 10-1, A.
3.
Select "Set RPM." See Figure 10-1,
B.
4.
Scroll UP or DOWN (see Figure
10-1, B) in increments of 100 RPM to
set the trigger point at which the shift
light will illuminate.
Due to data communication
delay of vehicle OBD-II, you may need
to set your shift light RPM lower than
your desired shift point.
To adjust shift light text and/or
background color:
5.
Select "Shift Light" from the main
"MENU."
6.
Select "Set Shift Light Font
Color" to change text color.
7.
Scroll (UP or DOWN) through the
list and press "YES" to select a color.
Pressing "NO" will take you back to
the "Shift Light" menu.
8.
"Set Shift Light Background
Color" to customize the look of your
42
97654 v.7
shift light.
9.
Scroll UP or DOWN through the
list and press "Yes" to select a color.
Pressing "No" will take you back to the
"Shift Light" menu.
10.
Return to the Gauge Screen
when finished.
Figure 10-1 – Shift Light Menu
A
Figure 10-2 – Shift Light
B