Reset - banks iDash 1.8 DataMonster Owner's Manual

SETTINGS,

12.13 Reset

The "Reset" settings allow you to
reset the iDash 1.8 to factory settings.
When calibrating the ambient light
sensor, ensure to maintain a stable
ambient light environment (Ex: inside
garage). If the lighting changes as the
calibration takes place, auto-dimming
will change inconsistently and
calibration will need to be performed
again.
To calibrate the ambient light
sensor:
1.
Select "Settings" from the main
"MENU."
2.
Select "Reset."
3.
Select "Calibrate Ambient
Sensor" to recalibrate.
4.
Select "YES" to continue. Ensure
that the lighting will stay the same for
the calibration. It should only take 30
seconds.
Select "NO" to return to the "Reset"
menu.
5.
Return to the Gauge Screen when
finished.
The iDash 1.8 will reboot and return
to the "Gauge Screen" if reset.
To reset all iDash 1.8 settings:
1.
Select "Settings" from the main
"MENU."
2.
Select "Reset."
3.
Select "Reset All Settings."
4.
Select "YES" to continue. Ensure
that the lighting will stay the same for
the lighting calibration.
Select "NO" to return to the "Reset"
menu.
64
97654 v.7
CONTINUED
5. The iDash 1.8 will reset and display
the pre-programmed Gauge Screen
layout.
If you have a vehicle specific
gauge it will still reset to standard.
Therefore you must reset manually in
"Vehicle Selection" to your specific
vehicle setting.