System Information - banks iDash 1.8 DataMonster Owner's Manual

SECTION: 13

SYSTEM INFORMATION

The system info menu displays
information regarding the Banks
hardware and software of the iDash
1.8 and any Banks device connected
to it. Please include this information
when requesting Banks Tech Support
for your device.
Information on any of the devices
connected to the iDash 1.8 can be
viewed in the System Information
menu of the Primary iDash 1.8.
This information is most useful in
determining what firmware your
devices are currently using.
Another feature in the "System
Information" menu is "Capture
BID Support." This feature will
record onto a text file all the
parameters available on your vehicle.
To access information on a
Banks device connected to the
iDah 1.8:
1.
Select "System Information"
from the main "MENU."
2.
Select the desired Banks device.
See Figure 13-1, A.
3.
The system information will be
displayed as shown in Figure 13-1, B.
This is the information that will need
to be supplied to Banks Tech Support if
requested.
4.
Return to the Gauge Screen
when finished.
To record parameters supported
on your vehicle:
1.
Insert a Micro SD card.
2.
Select "System Information"
from the main "MENU."
3.
Select "Capture BID Support."
4.
After 3 seconds a banner will
appear stating "Done" to indicate that
the data was saved.
Figure 13-1
A
B
65
97654 v.7