Start/Stop Data Log; Auto-Log Feature - banks iDash 1.8 DataMonster Owner's Manual

DATA LOGGING
3.
Select "ADD BIDs."
See Figure 6-2.
Alternatively, you can select "ADD
ALL BIDs" to record all available
parameters. See Figure 6-2, A.
4.
Select a "GROUP" parameter.
5.
Select one or more "ITEM"
parameters to record. The parameter
will be highlighted if selected.
See Figure 6-3.
Figure 6-3
6.
Press BACK to return to the
"GROUP" menu and select more
parameters from another group if
desired.
7.
Return to the "Datalog" menu.
The screen will list all the highlighted
parameters to be recorded.
See Figure 6-2, A.
8.
Once the parameter list for data
logging is as desired, return to the
Gauge Screen.

6.2 Start/Stop Data Log

A Micro SD card must be
inserted into the card slot on the front
face of the iDash 1.8 in order for data
logging to begin. Each time a data log
is stopped, a new .CSV file containing
the recorded data will be saved onto
the Micro SD card.
32
97654 v.7
(IF EQUIPPED),
Figure 6-4
6.2.1 Data Logging (Shortcut)
1.
While viewing the Gauge Screen
hold the DOWN button for 2 seconds
to start a new data log. A banner will
appear stating "Start Data Logging:
Log###.csv" once started.
2.
To then stop the data log, while
viewing the Gauge Screen hold
the DOWN button for 2 seconds. A
banner will appear stating "Stop Data
Logging: Log###.csv" once stopped.
6.2.2 Data Logging (Menu
Selection Method)
1.
Select "Data Logging" from the
main "MENU."
2.
Select "Start Data Log" to start
recording parameters (See Figure
6-1). A banner will appear stating
"Start Data Logging: Log###.csv"
once started.
device will display "SD card is Not
Ready."
3.
On the "LOGGING" menu screen,
select "Stop Data Log." A banner will
appear stating "Stop Data Logging:
Log###.csv" once stopped.

6.3 Auto-Log Feature

When enabled, this feature will
automatically start data logging at
vehicle startup. After this first log, data
logging will need to be activated as
stated in "6.2 Start/Stop Data Log".
CONTINUED
If no card is inserted, the