Background Alerts - banks iDash 1.8 DataMonster Owner's Manual

ALERTS,

9.2 Background Alerts

Background alerts are for a list of user
selected parameters that are constantly
being monitored by the iDash (when
enabled), even when they are not being
displayed on a gauge.
Unlike the displayed gauge alerts,
background alert parameters are
selected in the Background Alerts
menu.
To change a background alert
parameter:
The alerts list in the "Min/
Max Values" menu are linked to the
"Background Alerts" parameter list.
Adding, removing, or changing these
alerts in one menu will change the
alerts in the other.
1.
Select "Alerts" from the main
"MENU."
2.
Select "Background Alerts."
See Figure 9-2, A.
3.
Select any "Alert #:" to change.
See Figure 9-2, B.
If the alert is empty, it will be
skipped to Step 5.
4.
Select "Change Parameter." See
Figure 9-2, C.
5.
Select a "GROUP" parameter. See
Figure 9-2, D.
6.
Select an "ITEM" parameter to
change the background alert to (see
Figure 9-2, E) . You will be returned to
the parameter's alert options.
To enable and configure
background alerts:
1.
Select "Alerts" from the main
"MENU."
2.
Select "Background Alerts."
See Figure 9-2, A.
CONTINUED
3.
Select the "Alert #:"of interest.
See Figure 9-2, B
4.
Select "Set Limit." See Figure
9-2, C.
5.
Select "Alert High Enable" and/or
"Alert Low Enable" to turn "On" or
"Off" the alert. See Figure 9-1, B.
6.
Scroll UP or DOWN to adjust the
activation point value.,
7.
Hold SELECT to save the value and
return to the Gauge Screen or return
to the "Background Alerts" menu to
configure other alerts.
Figure 9-2
A
C
E
B
D
41
97654 v.7