Speedbrake & Tuner Auto Switch (Idash 1.8 Banks Bus 1 Only) - banks iDash 1.8 DataMonster Owner's Manual

SETTINGS,
if the cause of the code is not repaired
1.
Select "Settings" from the main
"MENU."
2.
Select "CEL Quick Clear" to
toggle ON or OFF. See Figure 12-9.
3.
Return to the Gauge Screen when
finished.
Figure 12-9
A
You will not be able to save CEL
info if the codes are cleared using the
quick clear feature.
12.12 SpeedBrake & Tuner
Auto Switch (iDash 1.8
Banks Bus 1 ONLY)
You must have a Banks
Tuner and the Banks SpeedBrake
connected to the iDash 1.8 Banks
Bus 1 to use this feature.
The "Tuner Auto Switch" feature
allows you to have the "Tuner" layout
and "SpeedBrake" layout switch
automatically while driving.
When does the SpeedBrake Layout
appear?
The "SpeedBrake" Layout appears
when your vehicle is coasting (greater
than 0 mph) while your foot is off the
acceleration pedal (0% APP).
CONTINUED
B
When does the Tuner Layout
appear?
The "Tuner" Layout appears when your
foot is on the acceleration pedal (greater
than 0% APP) OR when your vehicle is at
a stop (speed: 0 mph).
To enable/disable the "Tuner Auto
Switch" feature:
1.
Select "Settings" from the main
"MENU."
2.
Select "Tuner Auto Switch." See
Figure 12-10.
3.
To enable, select "Tuner Auto
Switch: On."
To disable, select "Tuner Auto Switch:
Off." See Figure 12-10.
4.
Return to the Gauge Screen when
finished.
Figure 12-10
A B
63
97654 v.7