Six-Gun & Economind Tuner - banks iDash 1.8 DataMonster Owner's Manual

BANKS MODULES (IF CONNECTED),
CONTINUED
11.3 Six-Gun & EconoMind
Tuner
The Six-Gun and EconoMind are
equipped with multiple power levels. You
can set the desired power level while the
engine is running but it is recommended
that you do not switch the power level
under high load applications.
If your Six-Gun has the Speed Loader
add-on, then the iDash 1.8 will
additionally have the Speed Loader
power level available.
11.3.1 Banks Tuner Gauge
Layout
Once the Banks Six-Gun or EconoMind
is connected to the iDash 1.8 (Banks Bus
1), a new gauge layout called "Tuner"
will be available for selection. To access
the menu selection, refer to "4.1 Layout
Selection" on page 28
Power Added (%):
When displaying the "Tuner" layout,
the vertical bar graph on the right hand
side represents, in real-time, how much
power the tuner is adding (See Figure
11-2). In Stock Mode there will be no
change to the bar graph and in Level
6 the bar graph will reach 100% under
proper operating conditions.
The "Power Added" data can also be
displayed on ANY layout as a numeric
value by selecting it from the "Tuner"
parameter group. For information on
how to access the menu, refer to "5.1
Parameter Selection" on page 30
Changing Tuner Settings on the
Tuner Layout Screen
To adjust the tuner power level, press
the UP or DOWN button. The current
power level will be displayed on the
bottom left of the "Tuner" layout.
Figure 11-5
A
C
11.3.2 Changing Tuner
Settings in the Menu
1.
Select "Banks Modules" from the
main "MENU." See Figure 11-5, A.
2.
Select the module "Tuner" for the
EconoMind or Six-Gun. See Figure
11-5, B.
3.
Select "Power:" to change the
tuner power level ("STOCK" to
"LEVEL 6"). See Figure 11-5, C.
IF the Speed Loader is connected,
the power level "Level SL" will be
available for selection.
B
47
97654 v.7