Vehicle Emissions Readiness - banks iDash 1.8 DataMonster Owner's Manual

DIAGNOSTICS,
7.2 Vehicle Emissions
Readiness
Check your vehicle's emissions
readiness to test and see whether or
not your vehicle's emission system is
operating normally.
1.
Select "Diagnostics" from the
main "MENU."
2.
Select "Vehicle" for vehicle
diagnostics. See Figure 7-1.
3.
Select "Check Emission
Readiness" for a list of supported
emissions monitors. See Figure 7-2.
"YES" indicates that the monitor
has passed its test and the system is
operating correctly. See Figure 7-4.
"NO" indicates that the monitor has
either failed the test or that the test
has not completed. See Figure 7-4.
4.
Scroll through the list of monitors
and return to the Gauge Screen
when finished.
The following may reset your
monitors:
- Clearing diagnostic trouble codes
- Loss of power to the vehicle by a
dead or disconnected battery
CONTINUED
Figure 7-4
35
97654 v.7