Software Introduction And Interface; Button Navigation - banks iDash 1.8 DataMonster Owner's Manual

SECTION: 3
SOFTWARE INTRODUCTION AND
INTERFACE

3.1 Button Navigation

SELECT button (see
Press the
Figure 3-1) to enter menus or select
an item. Holding down the button saves
the current selection and returns to the
Gauge Screen.
UP button or
Use the
button (see Figure 3-1) to change
values or scroll through the menus.
Hold down the button for rapid scroll/
value change.
For the iDash 1.8 with Data Logging,
holding the DOWN for two (2)
seconds while viewing the Gauge
Screen starts and stops data logging.
A single press of the
(see Figure 3-1) returns you to the
previous menu/screen. Holding down
the BACK button will return you to the
Gauge Screen.
Figure 3-1 – Button Function
UP button
Hold to... :
- Rapid scroll
(Value Selection)
DOWN button
Hold to... :
- Rapid scroll
(Value Selection)
- Start/Stop
(Datalog Mode)
20
97654 v.7
DOWN
BACK button
.
When data logging and viewing the
Gauge Screen, you can set laps/
markers in a data log session by
pressing the BACK button.
SELECT button
Hold to... :
- Save and return
to Gauge Screen
BACK button
Press to... :
- Create Laps/
Markers
(Data Log Mode)
Hold to... :
- Return to
Gauge Screen