Table of Contents
Advertisement
M16 Camera Manual: Installation
2.5
If you are intending to install the camera on a pole, you should consider using the MOBOTIX
M16 pole mount. This mount is made of 3-mm powder-coated stainless steel (white) and
has been designed specifically for outdoor use. The supplied stainless steel straps allow the
mount to be attached to poles with diameters between 60 mm and 180 mm. By design, the
pole mount does not allow the use of an in-wall socket. We recommend using an MX-Patch-Box
that can be easily inserted into the cavity socket of the wall mount (VarioFlex mount) in
order to ensure a weatherproof connection of the network devices. For more information
on the MX-Patch-Box, please visit www.mobotix.com and go to the Product Selector >
Accessories > Interface Boxes section.
The camera is always installed together with the VarioFlex
mount, which is shipped as a wall mount, and can also be
installed directly on the pole mount. The best camera posi-
tion for the selected sensor module must be found before
installing the camera (see Section 2.2, «First Installation
Steps»). You can fine-tune its position once the camera
has been installed on the wall.
64
Mounting the Camera with Pole Mount (Accessories)
Advertisement
Table of Contents
