Automatic Access Co Line Group Assignment - Panasonic KX-TD1232NE Programming Manual

[103] Automatic Access CO Line Group Assignment

Description
Assigns the sequence in which CO line groups will be accessed when in Automatic Line
Access mode. When a user dials the feature number for automatic line access (default=0) or
presses the L-CO button, an idle line is hunted in the programmed CO line group order.
Selection
CO line group number:
1 through 8, eight entries (max.) in desired order
Default
12345678
Programming
1.
Enter 103.
Display: Local Access
2.
Press NEXT.
Display example: Access.:12345678
3.
Enter the CO line group numbers in priority from top to bottom.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new order.
4.
Press STORE.
5.
Press END.
Conditions
There is a maximum of eight CO line groups. Up to eight CO line group numbers can be
entered.
Feature References
Line Access, Automatic
Line Access, Direct
Line Preference - Outgoing (Idle Line / No Line / Prime Line)
General Programming
2.2 System Programming
75