Light Switch; Fog Lights - Seat ALHAMBRA Owner's Manual

102 Lights and visibility
when the ignition is turned off when the ignition is on
Fog lights, dipped beam and
side lights off.
The guidance lights may be
switched on.
Side light on.
Dipped beam off; if necessary,
the side light comes on for a
time.

Fog lights

The warning lamps or
lights are switched on.
Switching on the fog lights
to the first stop.
Switching on the rear fog light
pull out to the maximum.
To switch off the fog lights, press the light switch or turn it to position .
Audible warnings to advise the driver that the lights have not been switched
off
If the key is not in the ignition and the driver's door is open, an audible
warning signal is heard in the following cases: This is a reminder to turn off
the lights.
When the parking light is on
When the light switch is in position
Lights off or daytime driving light
on.
Automatic dipped beam control
or daytime driving light on.
Side light on.
Dipped beam switched on.
on the light switch also indicate that the fog
: Turn the switch to position
: turn the light switch to position
page 100.
.
WARNING
The side lights or daytime driving lights are not bright enough to illuminate
the road ahead and to ensure that other road users are able to see you.
Always use your dipped beam head lights if it is raining or if visibility is
poor.
Lights and visibility: functions
Parking light
When the parking light is switched on, (right or left turn signal), the front side
light and the rear light on the corresponding side of the vehicle stay lit. The
parking lights will only work with the ignition off.
Daytime driving light
or pull out
The daytime driving light consists of individual lights in the front headlamps.
When the daytime driving light is switched on, only the individual lights come
or
on .
The daytime lights are switched on each time the ignition is turned on if the
light switch is in position , , or .
When the light switch is in position , , or , a photo sensor goes out and
the instrument and switch lighting comes on automatically.
Activating the daytime lights
Press and hold the turn signal and
main beam lever upwards and back-
wards (right turn signal and light
flasher).
Switch the ignition on and off for approximately 3 seconds.
Deactivating the daytime lights
Press and hold the turn signal and
main beam lever downwards and
backwards (left turn signal and light
flasher).