Seat ALHAMBRA Owner's Manual page 72

70 Cockpit
With the ignition switched on, and memory 1 or 2 displayed, briefly press
to change from one memory to another.
OK
The memory stores the values for the journey and the con-
sumption from the moment the ignition is switched on until
Trip mem- it is switched off again.
ory (for a If the journey is broken for more than two hours, the mem-
1
single jour- ory is automatically erased. If the journey is continued in
ney). less than two hours after the ignition is switched off, the
new data is added to the data already stored in the mem-
ory.
The memory records the values for a specific number of
partial trips, up to a total of 19 hours and 59 minutes or 99
Total mem-
hours and 59 minutes, or 1999.9 km (or miles) for 9999 km
2 ory (for all
(or miles), depending on the model of instrument panel.
journeys).
On reaching either of these limits, the memory is automati-
cally erased and starts to count from 0 again.
Possible displays
Menu Function
Journey duration This indicates the hours (h) and minutes (min) since
the ignition was switched on.
Current fuel The current fuel consumption while driving is dis-
consumption played in l/100 km (or miles per gallon, mpg); when
the engine is running but the vehicle is not moving,
in l/h (or gallons per hour).
Average fuel When the ignition is switched on, the average con-
consumption sumption (in l/100 km or in mpg) is displayed after
the vehicle has moved approximately 100 metres
(328 feet). Otherwise horizontal lines are displayed.
The value shown is updated approximately every 5
seconds.
Menu Function
Distance to empty Approximate distance in km (or miles) that can still
(the distance you be travelled with the fuel remaining in the tank,
can travel with the assuming the same style of driving is maintained.
remaining fuel) This is calculated using the current fuel consumption.
Distance covered Distance travelled, after ignition is switched on, in km
(or miles).
Average speed After the ignition is switched on, the average speed
will be shown after a distance of approximately 100
metres (328 feet) has been travelled. Otherwise hori-
zontal lines are displayed. The value shown is
updated approximately every 5 seconds.
Digital display of
Current speed displayed digitally.
speed
Oil temperature Updated engine oil temperature digital display
digital display
Speed warning to --- If the stored speed is exceeded (between 30 -
km/h 250 km/h, or 18 - 155 mph), an audible warning is
given together with a visual warning.
Changing between display modes
In vehicles without multifunction steering wheel: press the lever.
Vehicles with a multifunction steering wheel: press
Storing a speed for the speed warning
Select the display Speed warning at --- km/h.
Press OK to store the current speed and switch off the warning.
In addition, set the required speed by pressing the rocker switch on the
windscreen wiper lever or buttons
wheel for 5 seconds. Next, press
OK
is stored and the warning activated.
or .
or on the multifunction steering
again or wait a few seconds. The speed