Seat ALHAMBRA Owner's Manual page 48

46 Child safety
Child seats with rigid mounting
Observe the manufacturer's instructions when installing and removing
the child seat .
Press the child seat onto the retaining rings
direction of the arrow. The child seat must be safely engaged and click
audibly into place.
Pull on both sides of the child seat to ensure that it is secure.
Child seat with adjustable retaining straps
Observe the manufacturer's instructions when installing and removing
the child seat .
Place the child seat on the seat cushion and attach the retaining strap
hooks to the retaining rings
Tighten the straps evenly using the corresponding adjustment device.
The child seat must sit flush against the vehicle seat.
Pull on both sides of the child seat to ensure that it is secure.
WARNING
The lower anchor points for child seats do not include rings. Only secure
booster seats to lower anchor points.
page 45, fig. 27
page 45, fig. 27.
Securing a child seat using a Top Tether retaining strap
in the
Observe the manufacturer's instructions when installing and removing
the child seat .
Raise the head restraint behind the child seat until it engages.
Secure the child seat to the lower anchor points
Pull the upper child seat retaining strap back to the backrest of the rear
seat, below or on both sides of the head restraint (depending on the child
seat model).
Hook the upper retaining strap to the corresponding retaining ring (for
TOP TETHER) on the back of the backrest on the rear seat
Push the head restraint down as far as it will go. Ensure that it does not
interfere with the seatbelt from the upper attachment.
Tighten the strap so that the top of the child seat rests on the backrest.
Fig. 28 Upper retaining
strap hooked in the
luggage compartment
page 45.
fig. 28.