Seat ALHAMBRA Owner's Manual page 313

WARNING (continued)
Only fit the jack at the prescribed jacking points. The claw of the jack
should grip the reinforcement nerve on the underbody
fig. 181.
You should never have any limbs beneath a raised vehicle which is only
supported by a jack.
If you have to work underneath the vehicle, you must use suitable
stands additionally to support the vehicle, there is a risk of accident!.
Never raise the vehicle if it is tilting to one side or the engine is running.
Never start the engine when the vehicle is raised. The vehicle may come
loose from the jack due to the engine vibrations.
WARNING
Failure to follow the checklist prepared for your own safety could lead to
accidents and severe injuries.
Always complete the operations given in the checklist and observe the
general rules of safety.
Safety First
page 310,
Operating instructions
Changing a wheel
Removing the wheel
Please observe the check list
Loosen the wheel bolts page 308.
Jacking up the vehicle page 309.
Using the hexagonal socket in the wheel brace
slackened wheel bolts and place them on a clean surface.
Take off the wheel.
Putting on the spare wheel
Check the direction of rotation of the tyre
Fit the wheel.
Screw on the anti-theft locking bolt with the adapter in position
A A
page 308, fig. 179 or clockwise and tighten gently.
2 3
Replace the other wheel bolts and tighten slightly using the hexagonal
socket on the end of the wheel brace.
Practical tips
Wheels and tyres
Fig. 182 Changing the
wheel: loosen wheel bolts
with the socket at the end
of the wheel brace.
page 307.
fig. 182, unscrew the
page 295.
Technical Data
311