Seat ALHAMBRA Owner's Manual page 207

Optical parking system* (OPS)
The optical parking system is an accessory to the Parking sensor system
page 204 and the park assist system
Safety First
Fig. 141 On-screen OPS
A
display: an obstacle
A
has been detected in the
A
collision zone.
B
obstacle has been
detected in the segment.
A
zone recorded behind
C
the vehicle.
Fig. 142 On-screen OPS
A
display: an obstacle
A
has been detected in the
A
segment. zone
B
recorded behind the
vehicle.
page 207.
Operating instructions
The zone recorded by the sensors in front of and behind the vehicle is
displayed on the factory-fitted radio or navigation system screen. Any obsta-
cles are display in relation to the vehicle
Function
Switching the display
on:
Switching the display
off manually:
an
Switching the display
off manually:
Zones explored
The zone in which obstacles are recognised runs to a distance of around 120
cm from the front of the vehicle and up to 60 cm to the side
Behind the vehicle, the zone analysed reaches a distance of up to 160 cm and
around 60 cm to the sides
Screen display
The image displayed represents the supervised zones in several segments.
As the vehicle moves closer to an obstacle, the segment moves closer to the
vehicle displayed fig. 141
segment is displayed, this means that the vehicle has reached the collision
zone. Stop the vehicle!
Practical tips
.
Necessary operations
Switch on the parking sensor system
or the park assist system page 207. The OPS
switches on automatically.
Press a zone selection button on the factory-fitted
radio or navigation system
OR: Briefly press the function button
on the screen.
Drive forwards at more than about 10-15 km/h.
Select the reverse gear on vehicles with rear
assist page 212. The display changes to the
image of the camera.
A
fig. 141 .
C
A A
and fig. 142 . When the penultimate
B A
Technical Data
Driving 205
page 204
or
RVC
A
fig. 142 .
B