Number Plate Light; Interior Light And Front Reading Lights - Seat IBIZA ST Owner's Manual

230 If and when

Number plate light

– Insert the flat part of a screwdriver into the special slot and
remove the number plate light from its moulding.
– Remove the connector and extract the bulb. After changing the
bulb, fit the connector again.
– Place the light in its moulding, pressing the left side. Once it is
fitted into place, press the right side until you hear a click.

Interior light and front reading lights

Fig. 159 Remove the
number plate light.
To remove the glass
– Insert a fine screwdriver between the casing and the glass
⇒ fig.
– Carefully remove the glass, levering it to avoid possible damage.
To replace the bulbs
– Pull the bulbs outwards.
– To remove the central bulb, hold and press to one side.
Assembly
– Proceed in the reverse order, pressing gently on the outer edge
of the side light.
160.
Fig. 160 Front reading
light