Seat ALHAMBRA Owner's Manual page 314

312 Wheels and tyres
Lower the car with the jack.
Tighten all of the wheel bolts clockwise
onal pairs (not in a circle).
Put the caps, trim or full hubcap back on
WARNING
If the wheel bolts are not treated suitably or not tightened to the correct
torque then this could lead to loss of vehicle control and to a serious acci-
dent.
All the wheel bolts and hub threads should be clean and free of oil and
grease. The wheel bolts should be easily tightened to the correct torque.
The hexagonal socket in the wheel brace should be used for turning
wheel bolts only. Do not use it to loosen or tighten the wheel bolts.
After changing the wheel
Clean the wheel brace, if necessary and put it away in the luggage
compartment page 321.
Have the tightening torque of the wheel bolts checked as soon as
possible with a torque wrench
Note
If the vehicle is fitted with a tyre monitoring system, this should be "repro-
grammed" if necessary whenever a tyre is changed
. Tighten the bolts in diag-
page 305.
page 308.
page 222.