Seat ALHAMBRA Owner's Manual page 309

WARNING (continued)
Ensure the ground on which you park is flat and solid. If necessary,
support the jack on a wide solid base.
If you are changing a wheel yourself, you should be familiar with the
required procedure. Otherwise, you should seek professional assistance.
Only use suitable tools that are not damaged when changing a wheel.
Always stop the engine, turn on the electronic parking brake and place
the gear selector lever in position P, for an automatic gearbox, or engage a
gear for a manual gearbox to reduce the risk of the vehicle moving acciden-
tally.
Have the tightening torque of the wheel bolts checked as soon as
possible with a reliable torque wrench.
Preparations for changing a wheel
Check list
Before changing a wheel, complete the following operations in the order
given :
1. Park the vehicle on an even and solid surface.
2. Connect the electronic parking brake
3. Automatic gearbox: Move selector lever to position P
4. Stop the engine and remove the key from the ignition
5. Manual gearbox: Select a gear
6. Have all vehicle occupants get out of the vehicle and wait in a safe place
(for example, behind the safety barrier).
7. Block the opposite wheel with wedges or a similar object.
8. When towing a trailer: unhook the trailer from the towing vehicle and
park it correctly.
9. If the luggage compartment is full: take the baggage out of the vehicle.
Safety First
page 188.
page 179.
page 175.
page 179.
Operating instructions
10. Take the vehicle tool kit out of the luggage compartment.
11. Remove the wheel trims page 305.
WARNING
Failure to follow the checklist prepared for your own safety could lead to
accidents and severe injuries.
Always complete the operations given in the checklist and observe the
general rules of safety.
Practical tips
Wheels and tyres
Technical Data
307