Seat ALHAMBRA Owner's Manual page 339

Insert the lamp holder into the number plate light and rotate all the way
7.
in the opposite direction to the arrow
8. Plug the connector into the lamp holder.
9. Insert the number plate light carefully into the opening on the bumper. Ensure that the number plate light is in the correct position.
Insert the number plate light into the bumper until it audibly clicks into
10.
place.
Safety First
Fixed number plate light
page 336, fig. 211
Operating instructions
Bolted number plate light
Insert the lamp holder into the number plate light.
A
.
B
Press on the attachment tabs. The lamp holder must be firmly attached
to the number plate light.
Tighten the attachment screws for the number plate light using the
screwdriver.
Practical tips
If and when
Technical Data
337