Seat ALHAMBRA Owner's Manual page 327

Caution
Always carefully remove the fuse box covers and refit them correctly to
avoid problems with your vehicle.
Protect the fuse boxes when open to avoid the entry of dust or humidity.
Dirt and humidity inside fuse boxes can cause damage to the electrical
system.
Note
In the vehicle, there are more fuses than those indicated in this chapter.
These should only be changed by a specialist workshop.
Replacing a blown fuse
Safety First
Fig. 198 Image of a
blown fuse.
Operating instructions
Preparation
Switch off the ignition, lights and all electrical equipment.
Open the corresponding fuse box
Identifying a blown fuse
A fuse is blown if its metal strip is ruptured
Point a lamp at the fuse. This will make it easier to see if the fuse is blown.
To replace a fuse
If necessary, remove the plastic pincers from the fuse box cover.
For small fuses, insert the pincers from above
For larger fuses, insert the pincers from one side of the fuse
A
.
B
Remove the relevant fuse.
Replace the blown fuse by one with an identical amperage rating (same
colour and markings) and identical size
Replace the cover.
Practical tips
If and when
Fig. 199 Removing or
fitting a fuse.
page 324
fig. 198.
A
fig. 199 .
A
fig. 199
.
Technical Data
325