›››
Remove connector
Fig. 92
–
outward.
Unclip the retainer spring
–
pressing clockwise and inwards.
Extract the bulb and fit the replacement so
–
that the lug on the base fits into the recess
on the reflector.
Fit the connector.
–
Fit the protective cover. Make sure that the
–
cover fits correctly on the housing during
operation.
Replace the wheel housing cover.
–
Check whether the new bulb is working.
–
Changing turn signal bulbs
Changing turn signal bulbs.
Fig. 93
Raise the bonnet.
–
86
by pulling
Turn the bulb holder
1
–
clockwise and remove it.
›››
Fig. 92
Remove the bulb by pressing on the bulb
2
–
holder and turning it anti-clockwise at the
same time.
Fit the replacement bulb in the bulb holder
–
and turn clockwise as far as it will go.
Check whether the new bulb is working.
–
Changing daytime driving light bulbs
Fig. 94
Changing daytime driving light bulbs.
Raise the bonnet.
–
Turn the bulb holder
–
clockwise and remove it.
Remove the bulb by pressing on the bulb
–
holder and turning it anti-clockwise at the
same time.
Emergencies
›››
Fig. 93
anti-
1
›››
Fig. 94
anti-
1
Fit the replacement bulb in the bulb holder
–
and turn clockwise as far as it will go.
Check whether the new bulb is working.
–
Changing the fog light bulbs
Front fog light bulb
Front fog light.
Fig. 95
Front fog light.
Fig. 96