Park Assist System - Seat ALHAMBRA Owner's Manual

Hide thumbs Also See for ALHAMBRA:
Table of Contents

Advertisement

Park Assist system*

Introduction
The Park Assist system helps the driver to find a suitable place to park, to
insert the vehicle into parallel and perpendicular parking places and to leave
parallel parking places.
The Park Assist system is limited to the system abilities and requires that the
driver is especially attentive
The parking sensor system is a component of the Park Assist system that
helps to park the vehicle.
For vehicles with the optical parking system, the radio navigation systems
screen displays the detected zones in front of and behind the vehicle, indi-
cating - within the limits of the system - the position of obstacles compared
to the vehicle.
The park assist system cannot be switched on if the factory-fitted towing
bracket is electrically connected to a trailer.
Additional information and warnings:
Braking, stopping and parking
Parking sensor system
Caring for and cleaning the vehicle exterior
Accessories, parts replacement, repairs and modifications
WARNING
Despite the assistance provided by the park assist system, do not run any
risks when parking. The system is not a replacement for driver awareness.
Unintentional movements of the vehicle could cause serious injury.
Safety First
.
page 188
page 203
page 242
Operating instructions
WARNING (continued)
Adjust your speed and driving style to visibility, road, traffic and
weather conditions.
The surface of certain objects and items of clothing and external sound
sources may have a negative affect on the park assist signals or on the
system sensors or may not reflect its signals.
The sensors have blind spots in which obstacles and people are not
registered.
Always observe the area around the vehicle, as the sensors do not
always detect small children, animals or objects.
Caution
The park assist system aims exclusively at other parked vehicles, without
taking curbs or other circumstances into account. Make sure you do not
damage the tyres and wheel rims when parking. Where necessary, stop
manoeuvring to avoid damaging the vehicle.
The sensors may not always be able to detect objects such as trailer draw
bars, thin rails, fences, posts and trees, etc. This could result in damage to
your car.
Although the parking sensor system detects and warns of the presence of
an obstacle, the obstacle could disappear from the angle of measurement of
the sensors if it is too high or low and the system would no longer indicate it.
Therefore, it will not warn you of these objects. Ignoring the warnings of the
page 257
parking sensor system could cause considerable damage to the vehicle. This
is also valid when using the park assist (e.g. to park behind a truck or motor-
cycle). Therefore, always keep a close watch on the area in front of and behind
the vehicle while parking, and intervene promptly if necessary.
To ensure that the system works properly, the bumper sensors must be
kept clean, free of ice and snow and uncovered.
The bumper sensors may become damaged or misaligned, for example,
when parking.
Practical tips
Driving
Technical Data
207

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents