Wheel Trims - Seat ALHAMBRA Owner's Manual

T max. 190 km/h (118 mph)
U max. 200 km/h (124 mph)
H max. 210 km/h (130 mph)
V max. 240 km/h (149 mph)
Z max. 240 km/h (149 mph)
W max. 270 km/h (168 mph)
Y max. 300 km/h (186 mph)
Some manufacturers use the letters "ZR" for tyres with a maximum author-
ised speed above 240 km/h (149 miles).

Wheel trims*

Introduction
Additional information and warnings:
Caring for and cleaning the vehicle exterior
Changing a wheel
Vehicle tools page 321
WARNING
If the wheel trims are not appropriate or not fitted correctly, they could
cause major accidents or damage.
Incorrectly mounted wheel trims may come off while driving and
endanger other road users.
Damaged trims must never be mounted on the wheels.
Always ensure that the brake ventilation and cooling is not cut off or
blocked. This is also valid if hubcaps are fitted later. If there is not enough
air, you may require significantly longer braking distances.
Safety First
page 242
page 306
Operating instructions
Caution
Remove and remount wheel trims taking care to avoid damage to the
vehicle.
Full hubcaps*
Removing the full hubcap
Take the wheel brace and the wire hook from the vehicle tool kit
page 321.
Hook the wire through one of the grooves on the hubcap.
Insert the wheel brace onto the wire hook
in the direction shown by the arrow.
Practical tips
Wheels and tyres
Fig. 176 Removing the
full hubcap.
fig. 176 and pull the hub cap
Technical Data
305