Seat ALHAMBRA Owner's Manual page 338

336 If and when
Changing the number plate light
Complete operations only in the sequence given:
1.
Press the flat part of the screwdriver included in the vehicle on-board
2. tools ( page 322, fig.
of the number plate light
3.
Press on the connector lock in the direction of the arrow
4.
and pull out the connector.
Rotate the lamp holder in the direction of the arrow
5.
extract it with the lamp.
6.
Fig. 210 On the rear
bumper: number plate
lights.
Fixed number plate light
Always take the checklist into account and take the necessary actions
195) in the direction of the arrow, in the groove
fig. 210.
Detach the number plate light.
fig. 211
fig. 211
Replace the faulty bulb with a new identical bulb.
Bolted number plate light
Unscrew the number plate light screws using the screwdriver from the
on-board tools ( page 322, fig.
A
Separate the attachment tabs from the rear panel of the number plate
A
light by pressing.
A
and
B
Take the lamp holder out of the number plate light.
Fig. 211 Number plate
light: To remove the lamp
holder.
page 328.
195).