Seat ALHAMBRA Owner's Manual page 66

Hide thumbs Also See for ALHAMBRA:
Table of Contents

Advertisement

64
Cockpit
an engine oil change. The dates of the remaining services (for example, the
next Inspection Service or change of brake fluid) are listed on the label
attached to the door strut, or even in the Maintenance Programme.
In vehicles with Services established by time or mileage, the service intervals
are already pre-defined.
In vehicles with LongLife Service, the intervals are determined individually.
Technical progress has made it possible to considerably reduce servicing
requirements. The technology used by SEAT ensures that your vehicle only
has an maintenance service when it is necessary. To establish when the Main-
tenance Service is due (max. 2 years), the vehicle's conditions of use and
individual driving styles are considered. The service pre-warning first appears
20 days before the date established for the corresponding service. The kilo-
metres remaining until the next service are always rounded up to the nearest
100 km and the remaining time is given in complete days. The current service
message cannot be viewed until 500 km after the last service. Prior to this
only lines are visible on the display.
Inspection reminder
When the Service date is approaching, when the ignition is switched on a
Service reminder is displayed.
In vehicles without text messages, a spanner is displayed on the instrument
panel
with a figure given in km. The number of kilometres shown is the
maximum number that may be driven until the next service. After a few
seconds, the display mode changes. A clock symbol appears and the number
of days until the next service appointment is due.
In vehicles with text messages, Service in --- km or --- days is displayed on the
instrument panel.
Service due
After the service date, an audible warning is given when the ignition is
switched on and the spanner displayed on the screen flashes for a few
seconds
. In vehicles with text messages, Service in --- km or --- days is
displayed on the instrument panel.
Reading a service notification
With the ignition switched on, the engine off and the vehicle at a standstill,
the current service notification can be read:
Press the button
on the instrument panel several times until the
spanner symbol is displayed
.
ALTERNATIVELY: select the Settings menu.
From the Service submenu, select the option Info.
When the service date has past, a minus sign is displayed in front of the
number of kilometres or days. In vehicles with text messages the following is
displayed: Service --- km or --- days ago.
The service interval display is reset
If the service was not carried out by a qualified workshop, the display can be
reset as follows:
In vehicles with text messages:
Select the Settings menu.
In the submenu Service, select the option Reset.
Confirm with
when requested to do so by the system.
OK
In vehicles without text messages:
Switch the ignition off.
Press and hold the
button.
0.0 / SET
Switch the ignition back on.
Release the
button and, press
0.0 / SET
Do not reset the indicator to zero between two intervals, otherwise the
display will be incorrect.
for the next 20 seconds.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents