Seat ALHAMBRA Owner's Manual page 73

To switch off, press OK
Manually erasing memory 1 or 2
Select the memory to be erased.
Press and hold OK for approximately two seconds.
Personalising the displays
It is possible to select which of the displays in the multifunction display you
wish to see on the instrument panel in the settings menu. The units of meas-
urement can also be modified
Configuration Menu
Configuration
Function
Menu
Multifunction Configuration of the multifunction display data which you
display data wish to see on the instrument panel display
Compass Changing the magnetic region and calibration of the com-
pass. To calibrate the compass, please follow the instruc-
tions given on the instrument panel display.
Convenience Changing vehicle convenience functions
Lights &
Configuration of vehicle lighting
visibility
Time Changing the hours and minutes of the clock and the navi-
gation system. The time can be set here and the choice
can be made between the 24 hour and 12 hour display.
The S in the upper part of the display indicates that the
clock is set to summer time.
Safety First
. The stored speed is deleted.
page 71.
page 72.
page 73.
Operating instructions
Configuration
Function
Menu
Winter tyres Changing the visual and audible speed warnings. This
function should only be used when the vehicle is fitted
with winter tyres, which are not designed for travel at high
speeds.
Settings: Changing the language of the display texts and the navi-
Language gation system.
Units
Changing the units of measurement for the temperature,
consumption and distance.
Second speed Switching second speed display on and off
Autohold Selecting whether the Auto-Hold function should remain
on permanently.
Tourist light Headlamp adjustment for countries in which vehicles are
driven on the other side of the road. When the mark is acti-
vated, the headlamps of a left-hand drive vehicle are
adjusted for driving on the left. This function must only be
page 69.
used for a short period.
Service Check the service notifications or reset the service inter-
vals to zero
Manufacturer's
settings the factory value.
Back The main menu is displayed again.
Practical tips
Some functions of the Configuration menu will be reset to
Technical Data
Cockpit 71