Seat ALHAMBRA Owner's Manual page 25

Fastening or unfastening the seat belt with two buckles
Properly worn seat belts hold the vehicle occupants in the position that most
protects them in the event of an accident or sudden braking
The seat belts for the centre seat in the second row of seats and for the seats
in the third row of seats are fastened using two buckles.
Fastening the seat belt
Fasten your seat belt before each trip.
Adjust the rear seat and head restraint correctly
Engage the backrest of the rear seat in an upright position
Use the latch plate of the belt
not twist the seat belt when doing so
Engage the latch plate
Use the latch plate
Engage the latch plate
Safety First
Fig. 12 Fasten the seat
belt on the centre seat in
the second row of seats.
page 10.
A
fig. 12 to pull the seat belt down. Do
1
.
A
in the buckle of the corresponding seat
1
A
fig. 12 to pull the seat belt across your lap.
2
A
in the buckle of the corresponding seat
2
Operating instructions
Pull the belt to ensure that both latch plates are securely engaged in the
buckles.
Unfastening the seat belt
The seat belt must not be unfastened until the vehicle has come to a standstill
.
Press the red button on the buckle
released from the buckle.
Press the red button on the buckle
released from the buckle.
Guide the belt back by hand so that it rolls up easily and the trim is not
damaged.
WARNING
An incorrectly worn seat belt web can cause severe or fatal injuries in the
event of an accident.
The seat belt cannot offer its full protection unless the backrests are in
.
an upright position and the seat belt is worn correctly, according to your
size.
Unbuckling your seat belt while the vehicle is in motion can cause
severe or fatal injuries in the event of an accident or sudden braking.
Note
Seat belts with two buckles include a diagram to show how to fasten the seat
.
belt.
A
.
A
A
.
B
Practical tips
Seat belts
A
fig. 12 . The latch plate is
A
A
fig. 12 . The latch plate is
B
Technical Data
23