Seat ALHAMBRA Owner's Manual page 298

296 Wheels and tyres
SEAT recommends you take the vehicle to a qualified workshop to have the
tyres changed.
Tyres that are over 6 years old
Tyres are subject to an ageing process as a result of physical and chemical
processes. This may affect their performance. Tyres which are stored for long
periods of time without being used, harden and become more fragile than
tyres which are in constant use.
SEAT recommends that tyres over six years old are replaced with new tyres.
This also applies to tyres which appear to be in perfect condition on the
outside and which have a tread depth within the values stipulated by the Law
.
The date of manufacture, part of the tyre identification number (TIN), indi-
cates the age of the tyre
Storing tyres
Mark tyres when you remove them to indicate the direction of rotation (left,
right, forwards, backwards). This ensures you will be able to mount them
correctly when you replace them. When removed, the wheels and/or tyres
should be stored in a cool, dry and preferably dark location. Do not place
tyres mounted on the wheel in a vertical position.
Protect tyres not mounted on wheels from dirt by storing them in suitable
bags and standing them on the ground on their tread.
WARNING
Aggressive fluids or substances could result in visible or invisible damage
with the consequent risks.
Always ensure that tyres do not come into contact with chemical prod-
ucts, oil, grease, fuel, brake fluid or other aggressive substances.
page 303.
WARNING
Old tyres, even if they have never been used, may lose air or burst unex-
pectedly while driving, resulting in serious accident or damage.
If tyres are over six years old, they should only be used in an emergency
and with extreme caution.
For the sake of the environment
Old tyres must be disposed of by qualified personnel according to the laws in
the country concerned.
Wheel rims
The design of wheel bolts is matched to the rims. If different rims are fitted,
the correct wheel bolts with the right length and correctly shaped bolt heads
must be used. This ensures that wheels are fitted securely and that the brake
system functions correctly page 306.
For technical reasons, it is not generally possible to use the wheels from other
vehicles. In some cases, this may also be true for the same model of wheel.
The tyres and rims approved by SEAT are specially matched to the character-
istics of the vehicle and are critical to good road holding and safe handling.
Wheel bolts
Wheel bolts must be tightened to the correct torque
Beadlock wheel rims
Beadlock wheel rims have various components. These are joined together by
special bolts using a special procedure. This ensures good performance, a
better seal, improved safety and wheel run out. Therefore, worn rims should
always be replaced and must only be repaired in a qualified workshop. SEAT
recommends visiting a qualified workshop
page 306.
.