Seat ALHAMBRA Owner's Manual page 210

208 Driving
When cleaning the sensors with high-pressure or steam cleaning equip-
ment, spray the sensors briefly at a distance of no less than 10 cm.
Note
Contact a specialist workshop with any system faults. SEAT recommends
visiting a qualified workshop.
Parking using the park assist system
Fig. 144 Gap detected: Engage the reverse gear to park (parallel or nose/tail to the
kerb).
Preparing to park
The Traction control system (TCS) must be turned on
Fig. 143 Detailed view of Parallel parking: press the button
the centre console: button
When the function is enabled, the button
to switch the park assist
Perpendicular parking: press the button
system on manually.
twice. When the function is enabled, the button
If necessary, press the
Apply the turn signal indicator for the side on which a gap is to be
detected for parking. The instrument panel displays the side corresponding
to the road.
Parking
Parking parallel to the road: Drive next to the gap at a speed of no more
than 40 km/h and at a distance of between 0.5 m and 2 m.
page 188.
at speeds up to 50 km/h once.
fig. 143 will light up.
at speeds up to 50 km/h
fig. 143 will light up.
button once more to change parking mode.