System Management; System Information - Vitek VT-EHL Series Instruction Manual

SYSTEM SETUP
SYSTEM SETUP
SYSTEM : SYSTEM MANAGEMENT
SYSTEM INFORMATION: User can see the system information as below.
F/W VERSION : Shows the firmware version of the DVR.
H/W VERSION : Shows the hardware version of the DVR.
VIDEO SIGNAL TYPE : The DVR automatically switches between PAL and NTSC depending on the channel 1 input
DISK CAPACITY : The first value shows the total hard drive capacity installed.
IP ADDRESS : Shows either the manual IP address entered in NETWORK setup or the IP address assigned by a DHCP
server if enabled.
MAC ADDRESS : Shows the MAC (Media Access Control) address of the DVR.
It is unique – no other network device has this MAC address.
DDNS DOMAIN NAME : If DDNS is enabled, the host DDNS server is specified here.
RTSP SERVICE PORT: The port number that the DVR uses to support remote connection from the client software.
WEB SERVER PORT: The port number that the DVR uses to support remote connection from Internet Explorer
signal at power on.
or other web browsers.
Click the

SYSTEM MANAGEMENT

32
VT-EHL Series
menu.