Storage Mode Configuration; View Disk And S.m.a.r.t. Information - Vitek Transcendent VT-TR2HA Series Manual

Record & Disk Management Record & Disk Management
7.5.1 7.5.1

Storage Mode Configuration

Storage Mode Configuration
Click Start Settings Disk Storage Mode to go to the interface as shown below. Click Start Settings Disk Storage Mode to go to the interface as shown below.
There are four disk groups. By using disk group, you can correspond the camera to disk (the There are four disk groups. By using disk group, you can correspond the camera to disk (the
record data of the camera in the group will be stored into the disks in the same group). The record data of the camera in the group will be stored into the disks in the same group). The
DVR with e-SATA interface supports e-SATA recording. DVR with e-SATA interface supports e-SATA recording.
The added disks and cameras will be added into group one automatically. The disks and The added disks and cameras will be added into group one automatically. The disks and
cameras in the groups can be deleted except group one (select a disk group and then click cameras in the groups can be deleted except group one (select a disk group and then click
on the top right corner of the added disk or camera to delete it from the group). The deleted on the top right corner of the added disk or camera to delete it from the group). The deleted
disks and cameras will be moved into group one automatically. disks and cameras will be moved into group one automatically.
Each group can add the disks and cameras from other groups. Each disk and camera can only Each group can add the disks and cameras from other groups. Each disk and camera can only
be added into one group. Select a disk group and then click be added into one group. Select a disk group and then click
row to pop up a window. Check the disks or cameras in the window and then click "Add". row to pop up a window. Check the disks or cameras in the window and then click "Add".
7.5.2 7.5.2

View Disk and S.M.A.R.T. Information

View Disk and S.M.A.R.T. Information
Click Start Settings Disk View Disk Information to view the HDD information; click Click Start Settings Disk View Disk Information to view the HDD information; click
"S.M.A.R.T. Information" to view the working status of the HDD. Refer to the picture below. "S.M.A.R.T. Information" to view the working status of the HDD. Refer to the picture below.
55 55
DVR User Manual DVR User Manual
in the disk or camera in the disk or camera