View Disk And S.m.a.r.t. Information; Playback & Backup; Instant Playback - Vitek VT-TTAR810 User Manual

There are all four disk groups. By using disk group, you can correspond the camera to disk (the
record data of the camera in the group will be stored into the disks in the same group).
The added disks and cameras will be added into group one automatically. The disks and
cameras in the groups can be deleted except group one (select a disk group and then click
on the top right corner of the added disk or camera to delete it from the group). The deleted
disks and cameras will be moved into group one automatically.
Each group can add the disks and cameras from other groups. Each disk and camera can only
be added into one group. Select a disk group and then click
row to pop up a window. Check the disks or cameras in the window and then click "Add".
7.5.2

View Disk and S.M.A.R.T. Information

Click StartàSettingsàDiskàView Disk Information to view the HDD information; click
"S.M.A.R.T. Information" to view the working status of the HDD. Refer to the picture below.

8.1 Instant Playback

Click on the tool bar at the bottom of the preview camera window to play back recording
(click on the tool bar at the bottom of the live preview interface to set the default playback time).
Refer to the picture below. Drag the playback progress bar to change the playback time. You
can also use the right-click menu "Instant Playback" in the camera window and then set the
8 Playback & Backup
Transcendent DVR Series
52
in the disk or camera