Spot View; Preview Image Configuration; Osd Settings - Vitek VT-TTAR810 User Manual

5.2.4

Spot View

Click StartàSettingsàSystemàBasicàOutput SettingsàOutput 2 to go to the interface
as shown below.
Click on the left to create a new scheme. Each scheme can only add one analog camera.
Select a scheme on the left and then double click or drag a camera on the right to the scheme
window in the middle of the interface. After finishing the settings of all the schemes, select the
dwell time and click "Apply" to start playing the schemes in sequence in output 2.

5.3 Preview Image Configuration

5.3.1

OSD Settings

Click StartàSettingsàCameraàImageàOSD Settings to go to the interface as shown
below. Select the camera, input the camera name (or double click the camera name in the
camera list to change the camera name), enable or disable the name and time OSDs (if enabled,
drag the red name and time OSDs directly in the image view area to change the OSDs' display
position) and select the date and time formats. Click "Apply" to save the settings.
Transcendent DVR Series
34