Table of Contents
Advertisement
DISK SETTINGS
You can view the disk number, Disk capacity of the NVR and Serial
Number, Read/Write status of the disk. Click "Format" to format the
disk. Click "Next" to continue.
NETWORK CONFIGURATION & ADDING DEVICES
① Enter IP address, subnet mask, gateway. If using DHCP, please enable
DHCP in both the NVR and the router.
② Enter HTTP port (the default value is 80) and server port (default is 6036).
③ The internal ethernet port connects all PoE ports in the NVR system. The ports
are available if the internal ethernet port is online; if it is offline, all ports will be
unavailable.
④ Add Camera. Click "Next" to go to the following interface.
4
Advertisement
Table of Contents
