Table of Contents
Advertisement
2. Install the server into the chassis on page 40.
3. Connect all peripheral cables to the server.
4. Power up the server on page 41.
Install the server into the chassis
CAUTION: To avoid damage to the server or server blank:
•
Always support the bottom of the server or server blank when removing it from the chassis.
•
Do not use the release lever to carry the server or server blank.
Procedure
1. Slide the server into the chassis.
2. Close the release lever.
3. Tighten the release lever thumbscrew.
40
Removal and replacement procedures
Advertisement
Table of Contents
