Motor Driver I/F Terminal Ⅱ - Panasonic FPG Series Technical Manual

Dimensions and Driver Wiring
17.2.7 Motor Driver I/F Terminal Ⅱ
-Unit type
Product name
Motor Driver I/F Terminal Ⅱ
-Positioning unit which can be used
Product name
FP2 Positioning unit
Multhfunction type
FPSigma Positionin unit
-Related products
Product name
Cable for FP2 Positioning unit
Cable for MINAS AⅢ series
Cable for MINAS S series
-Parts and Dimension
The asterix ( →* ) below indicates the following:
AX1 and AX2; AX(3) and AX(4) which you can see at the PWB of the I/F terminal, both share the same
connector slot at the FP2 positioning unit side. (for PP22 type and PP42 type)
When the user will use the 3 and 4 axis connection from the FP2 positioning unit, the AX(3) and AX(4)
can be used for this.
Note: Number 3 and 4 are parenthesized at the I/F terminal.
17-10
Product number
1-axis type
2-axis type
Product number
2-axis type
4-axis type
1-axis type
2-axis type
Product number
0.5m
1m
1m
2m
1m
2m
AFP8503
AFP8504
AFP2434
AFP2435
AFPG432
AFPG433
AFP85100
AFP85101
AFP85131
AFP85132
AFP85141
AFP85142
FP2 Positioning Unit