Operation At Over Limit Input - Panasonic FPG Series Technical Manual

FP∑ Positioning Unit

7.5 Operation at Over limit Input

P point control operation is as follows when Over limit input (+) or Over limit input (-) is ON.
Condition
When P point
control is turned ON.
During P point
control operation
Direction Limit status
Over limit input (+):ON
Forward
Over limit input (-):ON
Over limit input (+):ON
Reverse
Over limit input (-):ON
Forward Over limit input (+):ON
Reverse Over limit input (-):ON
P Point Control: Multi - Stage Acceleration / Deceleration
Operation
Table not to move,
Limit error occurs.
Table not to move,
Limit error occurs.
Table not to move,
Limit error occurs.
Table not to move,
Limit error occurs.
Table stops,
Limit error occurs.
Table stops,
Limit error occurs.
7-15