Briggs & Stratton Snapper RER100 Operator's Manual page 30

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Product Specifications
Deck Size (in / cm)
Height of Cut (in / cm)
Transmission Type
Ground Speed - Forward (mph / kph)
Ground Speed - Reverse (mph / kph)
Engine Displacement (cc)
Spark Plug Gap (in / mm)
Spark Plug Torque ( lb-in / Nm)
Oil Capacity - with filter (oz / l)
Fuel Tank Capacity (qt / l)
Power Ratings: The gross power rating for individual gasoline engine models is labeled in accordance with SAE
(Society of Automotive Engineers) code J1940 Small Engine Power & Torque Rating Procedure, and is rated in accor-
dance with SAE J1995. Torque values are derived at 2600 RPM for those engines with "rpm" called out on the label and
3060 RPM for all others; horsepower values are derived at 3600 RPM. The gross power curves can be viewed at www.
BRIGGSandSTRATTON.COM. Net power values are taken with exhaust and air cleaner installed whereas gross power
values are collected without these attachments. Actual gross engine power will be higher than net engine power and is
affected by, among other things, ambient operating conditions and engine-to-engine variability. Given the wide array of
products on which engines are placed, the gasoline engine may not develop the rated gross power when used in a given
piece of power equipment. This difference is due to a variety of factors including, but not limited to, the variety of engine
components (air cleaner, exhaust, charging, cooling, carburetor, fuel pump, etc.), application limitations, ambient operating
conditions (temperature, humidity, altitude), and engine-to-engine variability. Due to manufacturing and capacity limita-
tions, Briggs & Stratton may substitute an engine of higher rated power for this engine.
30
2691382-00
28 / 71
1.5 - 4.0 / 3,8 - 10,2
Variable-speed disc drive
0.85 - 3.85 / 1,4 - 6,2
0 - 1.6 / 0 - 2,6
344
0.030 / 0.76
180 / 20
46 - 48 / 1,36 - 1,40
5 / 4,7
2691383-00
33 / 84
1.5 - 4.0 / 3,8 - 10,2
Variable-speed disc drive
0.85 - 3.85 / 1,4 - 6,2
0 - 1.6 / 0 - 2,6
500
0.030 / 0.76
180 / 20
46 - 48 / 1,36 - 1,40
5 / 4,7
www.snapper.com

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents