Start Button Lamp Replacement - Sega TARGET BRAVO OPERATION GHOST Owner's Manual

13-2 START BUTTON LAMP REPLACEMENT

MAKE SURE THAT THE MAIN SUPPLY VOLTAGE TO THE MACHINE IS SWITCHED OFF
BEFORE ATTEMPTING TO CARRY OUT THIS WORK
1
Before replacing any lamp, TURN THE POWER OFF.
2
To gain access to the Start Lamps, first remove the Control Panel by unscrewing the 4 M4x16 Socket Cap
Screws (4) fitted at each corner.
3
Lift the Control Panel to reveal the Star Button Lamp Housings. Hold the housing and gently pull to
disengage the lamp housing from the button. The Bulb is a "push to fit" bulb and is removed by pulling the
bulb from within the housing.
Note:
Do not twist the bulb - twisting the bulb will cause it to break.
Button housing
Lamp housing
Bulb 12v 1.2x Wedge type
13
89