6.1.
SECURING IN PLACE (LEG ADJUSTER ADJUSTMENT)
•
Make sure that all of the leg adjusters are in contact with the floor. If they are not,
the cabinet may move causing an accident.
This machine has 4 castors and 4 leg adjusters. When the installation position is determined, bring the leg
adjusters to come into contact with the floor directly, make adjustments in a manner so that the castors will
be raised approximately 5mm. from the floor and make sure that the machine position is level.
1. Install the machine in a suitable location.
2. Bring the leg adjusters to come into contact with
the floor directly, make adjustments in a manner
so that the castors will be raised approximately
5mm. from the floor and make sure that the
machine position is level.
3. After making adjustments, fasten the leg adjuster
nut upward and secure the height of the leg
adjuster.
9