Installing A Sata Storage Drive - Nexcom NISE 105U User Manual

Chapter 3: System Setup

Installing a SATA Storage Drive

1. The inner side of the bottom cover is where you will install the SATA
drive. Align the mounting holes of the SATA drive with the mounting
holes on the cover.
Copyright © 2019 NEXCOM International Co., Ltd. All Rights Reserved.
2. While supporting the SATA drive, turn the cover to the other side. This
will be the outer side of the cover. Use the provided screws to secure the
drive in place.
40
NISE 105U User Manual