System Health Tests; Step Response Test - Raven SC1 Calibration & Operation Manual

SYSTEM HEALTH TESTS

FIGURE 5. Test Selection Screen
System health tests are performed to diagnose and correct machine and SC1/TC1 calibration issues. The following
system health tests can be performed via the SC1/TC1 system:

• Step Response Test

• Machine Test
STEP RESPONSE TEST
The Step Response Test is used to determine the responsiveness of the implement steering system.
FIGURE 6. Step Response Test Screen
1. Drive forward 1 - 4 mph with the engine RPM set at 3/4 throttle.
Diagnostics and Troubleshooting: System Health Tests
DIAGNOSTICS AND TROUBLESHOOTING
WARNING
The machine will steer automatically while system
heath tests are being performed. Be sure the area
around the vehicle is clear of people and
equipment before engaging the SC1/TC1 system.
65