CHAPTER 5
RESET CALIBRATED GAINS
FIGURE 16. Reset Calibrated Gains Screen
To reset the SC1/TC1 system to factory defaults:
1. From the SC1/TC1 Home screen, select the Settings Menu button.
2. Select the Steering Setup tab and the Reset Calibrated Gains button.
3. Review the warning prompt and select the Accept button to reset the SC1/TC1 to a factory condition. Select the
Cancel button to keep the current system configuration and return to the Steering Setup tab.
OPERATOR PRESENCE SENSOR
FIGURE 17. Steering Disengage Settings Screen
SENSOR TYPE
Use the drop down list to select the type of switch used to detect the presence of the operator while the system is
engaged.
• Single Pole
• Double Pole
• CAN Switch
48
Raven SC1™/TC1™ (software version 1.5) Calibration & Operation Manual for Tractors and Sprayers